Page 1 Fire Alarm and Mass Notification O&M Manual TACTICAL EQUIPMENT MAINTENANCE FACILITY (TEMF) FT BLISS EQUIPMENT MAINTENANCE FACILITIES (EMF) FORT BLISS, TEXAS Gamewell FCI Fire Alarm & Mass Notification System CFI Security Inc. 1845 Northwestern, Suite B El Paso, Texas 79925 Ph (915) 778-6061 Fax (915) 778-7046.

Control Panel

1. An automatic fire alarm system—typically made up of smoke detectors, heat detectors, manual pull stations, audible warning devices, and a fire alarm control panel (FACP) with remote notifi- cation capability—can provide early warning of a developing fire.
2. This manual is designed for use by factory trained installers and operators of the Fire Control Instruments, Inc. (FCI) 7200 Series Fire Alarm Control. All illustrations, installation and operating procedures, functional descriptions, and other pertinent information are contained in this manual.
3. Manuals, installation installation instructions, catalogs, and more for Gamewell fire alarm and security devices.

The E3 Series® Expandable Emergency Evacuation System by Gamewell-FCI is in the forefront of the latest generation of fire alarm control panels. Employing the new high-speed Velociti® sensors, the E3 Series provides previously unattainable polling speed and response together with the flexibility demanded by today’s emergency evacuation systems. In addition to their high-speed polling rate, the Velociti Series of sensors feature bi-polar LEDs that flash green for normal polling, and light red steadily to indicate an alarm.

The E3 Series is equipped with an 80-character LCD-E3 alphanumeric LCD display that allows 40 characters to be user-defined for custom installations. Up to six (6), keyboard LCD displays may also be remotely located. In addition, you can install five of the familiar LCD-7100/RAN-7100 remote displays. The displays show instant system status information and can be connected in any desired area of an installation.

A high-speed 32-bit processor easily tackles a wide array of applications from small office buildings to multi-complex, high-rise installations.

The (64) node networking is made possible by 625K baud/ARCNET communications using twisted-pair copper cable, fiber-optic cable, or a combination of both. In addition, the Addressable Node Expander (ANX) board expands the network to one hundred and twenty-two (122) nodes.

The basic E3 Series is equipped with an ILI-MB-E3/ILI95-MB-E3 Intelligent Loop Interface-Main Board, ILI-S-E3/ILI95-S-E3 Intelligent Loop Interface Expansion Board, ANX, and ASM-16 Addressable Switch Module that features sixteen (16), software programmable switches, each accompanied by red, green and yellow LEDs that can be programmed to indicate operation of the switches. Additional ASM-16 modules may be added to expand the operation to a plateau previously unimagined.

The Intelligent Loop Interface – Expansion Board (ILI-S-E3/ILI95-S-E3 provides the E3 Series control panel with two (2), additional signaling line circuits. The layout is similar to the ILI-MB-E3/ILI95-MB-E3 with the exception that a number of components are omitted. It occupies one node on the Broadband network.

Each ILI-MB-E3/ILI95-MB-E3 can support as many as sixteen (16), ANU-48 LED Driver modules supporting hundreds of LEDs on a 3rd party graphic annunciator for remote annunciation. The ANU-48 modules may be installed in any Listed remote annunciator. It can be remotely located via an RS-485 serial interface. An array of cabinets allows for neat, compact, attractive installations.

Fci 7200 Datasheet

Panel Features:

• IBC Seismic Certified
• Listed under UL® Standard 864, 9th Edition
• UL Listed for smoke control (dedicated and non-dedicated) when properly configured
• FM/UL Listed for Pre-action/Deluge use
• Styles 4, 6, or 7* signaling line circuits
• Two to (244) SLCs each supporting 159 sensors and 159 modules
• 625K baud ARCNET communications using wire, fiber, or mixed configurations for installation flexibility
• High-speed 32 bit processor and 4100 event history log
• Advanced Boolean logic-based programming such as AND, OR, NOT, time delay and calendar functions configurable via computer programming
• Supports up to (16), ASM-16 addressable switch or ANU-48 LED driver modules per ILI-MB-E3/ILI95-MB-E3
• Two (2), Class A, Style Z or Class B, Style Y, notification appliance circuits rated at 2.0 amps. per circuit
• Integral city connection
• Flexible 115,200 baud high speed RS-232 interface
• 40 character user-defined text per device
• Supports up to five (5), LCD-7100/RAN-7100 displays and six (6), LCD-E3 keyboard displays per ILI-MB-E3/ILI95-MB-E3

Velociti® Intelligent Service Features:

• Poll 318 devices in less than two (2) seconds
• Activate up to 159 outputs in less than five (5) seconds
• LED’s blink associated device address during Walk Test
• Fully digital, hi-precision protocol
• Up to 9 levels of sensitivity adjustment
• Pre-Alarm adjustable between 15 levels for both Alert and Action
• Day/night automatic sensing adjustment
• Sensitivity windows:
  • Ion .05 to 2% obscuration
  • Photo 1 to 3% obscuration
  • Laser .02 to 2% obscuration
  • MCS Acclimate2F .5 to 4%, also self-adjustable options 1 to 2%, 2 to 3%, 3 to 4%
  • HARSH 1 to 3% obscuration
• Drift compensation
• Each Loop Card has its own integral processor providing maximum survivability on loss of any other component. SLC provides full response on loss of any other system processor
• Optional programmable switches can be configured to enable, disable or group any combination of output devices
• Integrated point or Grouped Cross Zoning allows for numerous devices installed at any location to cooperate and determine alarm condition
• Automatic detector sensitivity testing
• DIRTY and VERY DIRTY detector maintenance alerts

Cabinets

The E3 Series® Expandable Emergency Evacuation System by Gamewell-FCI offers several cabinet size options. These cabinet options allow for neat, sturdy, attractive installations. The E3 Series cabinet assembly is a compact, wall-mounted enclosure. A typical cabinet includes a backbox and an outer locking door. In addition, there are several inner door choices and mounting plates to accommodate a variety of E3 sub-assemblies.

Each cabinet backbox includes mounting patterns for plates to aid the installer in arranging and securing the subassemblies to the backbox. Backbox knockouts are also positioned at numerous points to allow a conduit access into the enclosure.

Four (4) Annunciator Cabinet sizes provide maximum flexibility that can meet any application.

• Cabinet A or AA offers 2 slot and 3 slot options to accommodate either of the following configurations:
  • Cabinet A or AA, 2 slot allows space for one (1) LCD-E3 and one (1) NGA or one (1) ASM-16/ANU-48.
  • Cabinet A1 or AA, 3 slot provides space for either one NGA and two ASM-16s or three ASM-16s/ANU-48s.
• Cabinet A1 houses one NGA or one ASM-16/ANU-48.
• Cabinet A2 accommodates a single LCD-E3 display.

E3BB-RBSlim or B-Slim contains the 600 Series cabinet.

Cabinet B includes a mounting plate that contains a space for the ILI-MB-E3/ILI95-MB-E3, PM-9/PM-9G sub-assemblies and batteries set inside the backbox. Additional subassembly options mounted on the backbox include the DACT-E3 and RPT-E3. The 2 slot inner door houses the following options:

• one (1) LCD-E3 module and
• either one (1) ASM-16/ANU-48 or one (1) NGA module

Both C and D size Command Center cabinets house a variety of E3 Broadband sub-assemblies in multiple configurations that provide a solution to a wide range of applications.

Two (2), flexible inner door panel selections are available for C and D size Command Center cabinets that may contain a fire fighter’s phone handset, a microphone, and optional modules to meet the facility operation requirements.

Cabinet Features:

• IBC Seismic Certified
• 16-gauge steel backbox
• Removable outer and inner doors
• Inner door bonding strap used to provide electrical continuity for grounding
• Backbox and door ground studs provide positive grounding. 180° opening door with full clearance
• Available in either black or red
• Lexan® windows appear on the doors of most cabinets, except the Cabinet “C” and “D” INX cabinets and the INX CAB-B cabinet which contain louvered doors
• 90° opening door with zero clearance
• Keylock with quarter turn latch
• Trim Ring accessories available

Installation, Operation, Programming and User Manuals

Find, download and program any fire or security system with our database of installation, operation, instruction, technical, owners, user and programming alarm manuals at no charge to you.

Have you lost or misplaced your existing manual? If so, download a free PDF operation, installation, instruction, owner, user and alarm programming manual for Ademco, Apex, Bosch, Fire-Lite, Silent Knight, DSC, FCI, FBII, Caddx, Moose, Napco, Radionics, Notifier, Simplex, Mirtone, Visconic.

Most alarm systems provide two instruction manuals. The alarm user manual offers information on the daily use of the system such as arming and disarming, bypassing zones, changing user codes and other action that the user might need to know to effectively operate the security system.

Fci 72 Troubleshooting Guide

The installation manual provides more detailed technical information about installing the alarm system including instruction for programming devices such as sensors, motion detectors, glass break detectors and keypads. The instruction manual also outlines how to connect a phone line to the system and establishing 24 hour monitoring services.

For minor changes, some systems have a programming manual which offers a quick reference guide for programming after the initial installation. Before programming, it is very important that you read the installation and programming manual for your particular system. We are your single source for security and fire alarm technical documentation.

Finally, most manufacturers or dealers have their own websites that may offer copies of these manuals. Some require registration or a fee, but here it is always free.

Fci 7200 Fire Panel Manual

Free PDF Alarm Manual

Search and download the alarm manualPDF for your specific system. All guides are formatted for ease of downloading, printing and viewing and are actual reproductions of the exact manual shipped with the alarm control panel. These user guides provide detailed insight on the options, features and capabilities of your system and its daily operation.

Before you install, maintain or service your existing security or fire alarm system, you must first identify the system model that you own. Check the initial paperwork or invoice that was completed on the day of installation to determine which model was installed. Look at the actual alarm panel to see the model number which is usually located on the metal housing or the board itself. Once you find the model and make of your system, simply search our directory for the correct guide.

Unlocking Locked Panels

Fci 72 Fire Panel Manual

Instant Unlocker is a device that is used to for unlocking locked alarm control panels when you do not know the actual programming code. No matter what control panel you have, instant unlocker can unlock your existing alarm panel so you will be able to perform programming functions. Learn how to unlock locked panels for any fire or burglar alarm system.

Fci 7100 Manual Pdf

Panel Programming Software

Fci 7200 Pdf

Most manufacturers offer alarm control panel programming software to make it simple to upload, download and program their particular panel. Some offer remote programming software to make changes from a remote location so it will be easier to troubleshoot problems offsite. Using alarm panel programming software eliminates the need to use the traditional manuals.

All of the logos, copyrights, trademarks and alarm manuals are property of their respective owners.